UPVC Replacement Door Handles
As time passes the handles on your doors will wear out and require replacement. It is crucial to be able to match the dimensions of the handles that were previously used when replacing them.
The top screw's location the lever, and the keyhole size are the three measurements you need to check. Use the size guide to aid you.
Inline Lever/Lever
A lever/lever handle is a contemporary door handle designed to work with new or replacement doors. This kind of handle is available in many designs and finishes. This handle is offered by several manufacturers including Avocet ERA Fullex Hoppe Mila Millenco Yale.
Fab and Fix Windsor Inline Sprung Lever Door Handle
The door handles made of uPVC/Composite are made of robust materials and are suitable for doors with multi-point locks that require a heavy duty design. The handles are inline and work off the same spindle and screw fixings so they can be easily incorporated into doors made of uPVC/Composite, either new or old.
The design of the sprung lever allows the handle to be positioned and angled to ensure a comfortable experience and is suitable for all users. The handle has been tested to 200 000 cycles. This helps to ensure that the quality of finish and performance over time. The sprung lever is adjustable to accommodate a wide range of locks. This is particularly useful in doors that are narrower, where the cylinder is further back in the door. A shortened lever is also an ideal choice for doors where the latch can be activated by the thumb turn inside.
Lever Pad
The lever pad upvc handle is distinct from the lever handles found on most doors. These handles can operate from a single spindle (inline) or independently from each side by using two inline or offset spindles (pad). They are generally employed on UPVC double-glazed doors and come in many variations & styles.
The handles have been tested to a minimum of 200k cycles and are available in several finishes including White, Silver, Chrome & Gold. The finish is in line with BS EN 1670:2007 Grade 5 and is also resistant to corrosion, thereby giving the handle a high degree of durability and performance for the intended use.
All of the UPVC lever pad designs come with a spindle and screws, allowing them to be put on a new or existing uPVC door. The backplate fixation centres of 211mm allow for a wider handle, which is usually a benefit when replacing an old or damaged multi-point door lock mechanism. These handle levers have a spring, which solves the problem of door handles that move out of horizontal position when not being used.
It is crucial to match the PZ dimensions of both the multipoint lock as well as the uPVC doors when selecting the replacement UPVC spindle and handle. This measurement is often referred to as the handle centre or 'cylinder centres' and is a critical aspect to match the appropriate handles.
After you have determined the correct PZ size it is important to ensure that the lever and push pads are shaped to fit the American with Disabilities Act compliant handles you require for your door. These are typically a square or round shape with an internal lever as well as an external push pad.
The majority of UPVC lever pads that we offer are sprung, which means that they will return to their horizontal position when not being used, instead of hanging out and possibly securing in the frame. This stops draughts and cold air from entering a home. The majority of UPVC lever pad style handles come in both left and right handed models which allows them to be put on either side of doors.
Euro Cylinder
Cylinder locks are usually found on uPVC doors, but can also be found on other types of door. They operate by using a key to unlock a cylinder that will reveal pins that can be aligned to those in the lock body and permitting them to turn an revolving cam, opening the door. Euro cylinders can be fitted with up to six pins, with both internal and external doors usually requiring different levels of security.
The choice of cylinder you choose is essential. It depends on the use that your doors and handles receive. For instance, doors that are external require a higher security cylinder, whilst internal doors can be secured using the standard cylinder. Certain cylinders are equipped with additional features that can increase security, such as anti drill or anti bump properties.
To make sure that the euro cylinder is the right size for your door, it must be measured correctly. The cylinder should be measured from the hole in the center of the fixing screw to the end of the cylinder including the thumb turn if you have one. If you are unable measure it with the lock in position, you can remove it. It is crucial to not have a cylindrical lock that extends beyond the handle or escutcheon. This can make it susceptible to lock snapping attacks.
The design of most newer cylinders has anti-drilling and bump resistance features. These are designed to reduce the chance of attack by forcing cylinders to turn in a new direction. This can to deflect attacks and ensure your door is secure.
Certain cylinders are constructed to resist snapping. upvc door handle replacement yate is a common attack on cylinders. A special tool is used to break the break line of the lock, and the front of the cylinder is snapped off. This is much quicker and easier to achieve than opening the door with a multipoint lock and leaves little evidence of a break-in which could hinder the insurance claim.
Spring Cassette
This spring cassette is located in the base plate of your door handle. It is a spring-loaded solution to bring your multipoint lock handles to their original position after using. The handles had no spring and would drop when the locking mechanism was disconnected. Adding this simple component is one of the most effective ways to fix this and it is also an effective way to keep your doors made of upvc from getting stuck in an open or closed position, as they are not always easy to close manually.
These spring cassettes were created to be used with a sprung multipoint locks. They are not compatible with handles that are not sprung and you'll have to cut a hole into the backplate to allow them to fit. (Please look at the image for a detailed diagram). These cassettes can be used as a replacement to broken or missing cassettes on the backplate of uPVC door handles. They are available as one unit. They come with a square cut out that can accommodate an 8mm shaft.
These spring cassettes are an excellent cost-effective solution to the issue of door handles that are that are sagging. These spring cassettes are easy to install and will extend the life of your uPVC door. Contact us to learn more about our range of uPVC accessories and spares. We are always available to provide expert advice and support you.